28
© 2 0 0 1 d i r e c t e d e l e c t r o n i c s , i n c .
➤
➤
Full trigger response
30
or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the Directed
®
Bitwriter or a personal
computer and the TechSoft Programmer, the full triggered
response can be programmed for any duration ranging from
1 to 180 seconds.
➤
➤
Automatic Engine Disable (AED) on or
off
: The purpose of
this feature is to protect the vehicle from being stolen at all
times, regardless of whether or not the alarm is armed. If
AED is programmed on, the starter of the vehicle will be
disabled 30 seconds after the ignition is turned off. Once the
key is turned off, the LED will flash slowly (one-half its
normal armed rate) to indicate the AED arming cycle.
Thirty seconds later, the starter will be disabled. To start the
car, it will be necessary to arm the car with the remote and
then disarm it with the remote. It is also possible to disarm
the AED feature by turning the ignition key to the “run”
position and pressing the Valet button the programmed
number of times. AED is also disabled when the system is in
Valet mode.
➤
➤
Siren tones and chirp volume. The output of the siren
consists of six different tones in sequence. Any of these tones
note:
This feature will only function if the starter inter-
rupt relay has been installed.
