26
© 2 0 0 1 d i r e c t e d e l e c t r o n i c s , i n c .
p
po
ow
we
err ssa
avve
err m
mo
od
de
e
Your system will automatically enter Power Saver Mode while
armed or in Valet Mode, after a period of time in which no oper-
ation has been performed. This lowers the current draw to
prevent the system from draining the vehicle’s battery. Power
Saver Mode takes over under the following conditions:
➤
➤
Power Saver when the system is armed:
After the system has
been armed for 24 hours, the LED will flash at half its
normal rate, decreasing the system's current draw.
➤
➤
Power Saver in Valet Mode:
When the system enters Valet
Mode the LED illuminates steadily. If the vehicle is not used
(ignition is not turned on) for a period of one hour while the
system is in Valet Mode, the LED will shut off. If the system
remains in Valet Mode, the LED will come back on the next
time the ignition is turned on and then back off.
p
prro
og
grra
am
mm
miin
ng
g o
op
pttiio
on
nss
➤
➤
Active arming
(transmitter only) or passive arming (auto-
matic arming 30 seconds after the last door has been closed).
➤
➤
Arming/disarming siren chirps
on
or off.
➤
➤
Auto-Lock/Auto-Unlock with Smart Relocking
on
or off:
When this feature is programmed on, the doors will lock
three seconds after the ignition is turned on, and unlock
when the ignition is turned off. The system can also be
