11
© 2 0 0 4 d i re c t e d e l e c t ro n i c s , i n c .
auxiliary channel bypass
Alarm sensor input zones one, two, three, and eight will be bypassed
while a pulsed or timed auxiliary Output is active.
panic mode with smart door locking
If you are threatened in or near your vehicle, you can attract attention
by triggering the system with your remote! Just press
for two
seconds to enter Panic Mode. The siren will sound and the parking
lights will flash for the programmed duration. If the ignition is on, the
doors will lock; if the ignition is off, the doors will unlock. To stop Panic
Mode at any time press
on the remote again.
disarm/valet
®
mode
Entering your pin code using the PlainView 2 Valet
®
button allows you
to disarm the system or enter valet
®
mode without using the remote.
In valet
®
mode, the security system will not arm, even with the remote,
but all convenience functions (door locks, trunk release, etc.) will con-
tinue to work normally.
To disarm or enter Valet
®
Mode:
1. Turn the ignition on.
2. Enter PIN code (factory setting is 2).
