Directed Electronics 991 Скачать руководство пользователя

Страница: 39 / 60

down the menu.

After you select the time increment (hour /min ), press

AUX

. The hour or

minute flashes. Press the

AUX

button to move up to the hour or minute, and

press the

AUX

button to move down to the hour or minute you want to set.

Once the desired time has been reached you can either choose “back” in

the menu or press

A U

to save and exit.

➢

Sensor adjust

Used to adjust the onboard impact sensor, it is recommended that your installer

adjust the sensor.

➢

Pair Remote Mode

It is recommended that this feature for programming the remote to the system is

performed by your installer.

➢

Demo Modes

One-time with sound

•

The LCD icons display one at a time with icon name displayed in the text

field, while the remote is playing tones.

One-time without sound

•

The LCD icons display one at a time until they are all turned on. The remote

does

not

play any tones.

Note:

If the charger is plugged into the remote and demo mode is activated, the

remote plays the demo mode continuously. The continuous loop demo mode is

exited when the charger is disconnected.

Содержание 991





























































Результаты поиска

Содержание 991

Отзывы:

Похожие инструкции для 991

Бренды по названию

Популярные бренды

Directed Electronics 991, Руководство пользователя

Результаты поиска

Содержание 991

Отзывы:

Похожие инструкции для 991

Бренды по названию

Популярные бренды