Directed Electronics 991 Скачать руководство пользователя

Страница: 27 / 60

will beep once.

Silent Mode 2 - Turning off the siren

You can turn off the vehicle siren and flashing lights on a one-time basis,
leaving the system’s paging feature as the only alarm response.

Note:

Call the police immediately if you witness a crime in progress.

Paging range varies with terrain and environmental conditions.

Sensor Silent Mode

In this mode, a sensor cannot trigger the siren, but will cause the
2- way remote to be paged. All entry points (doors, hood, etc.) will still
trigger the siren.

Press the

AUX

button three times, and then press the

AUX

button. The text

will display “sensor silent arm” confirming entry into sensor silent mode.

Note:

The next time you arm the system, it will function normally.

Full Silent Mode.

In this mode, the siren cannot be triggered, but any trigger will cause
the 2-way remote to be paged.
Press the

AUX

button four times, and then press the

AUX

within five

seconds. The text will display “ full silent arm” confirming entry into full
silent mode

➢

Disarm Features:

Silent disarm

Command

Press

AUX

one- time and then press

AUX

Feedback

Screen changes to unlock icon

Notes

Disarms the system without chirps

Содержание 991





























































Результаты поиска

Содержание 991

Отзывы:

Похожие инструкции для 991

Бренды по названию

Популярные бренды

Directed Electronics 991, Руководство пользователя

Результаты поиска

Содержание 991

Отзывы:

Похожие инструкции для 991

Бренды по названию

Популярные бренды