Directed Electronics 991 Скачать руководство пользователя

Страница: 13 / 60

➢

Battery Replacement

Slide the door up to expose the battery beneath the holder. Remove the
expired battery. Place the new battery into the remote control. When
power is returned the remote control is ready for use.

➢

Multi-car control capability

You can operate the 2-way remote control system for two cars, with full
command capability for both vehicles.

To change the Car to be operated:

Two Way Remote

Press/hold the

AUX

button for 3 seconds or until the remote beeps.

The

ALL

icon flashes and the text “Car 1” or “Car 2” is

displayed.
Change car: While in this mode press the

AUX

button to switch

between cars and the

ALL

icon changes accordingly

indicating which car the remote currently operates.
Select the car you want to operate and then press any command

to operate the system. The selected car remains selected until the
setting is changed.

One Way Remote

Press and hold the

AUX

button until the amber light blinks once or

twice indicating current vehicle (one blink = car 1, two blinks =
car 2).
To change from one car to the other press the

AUX

button again.

When using the remote to control the system, the amber light will

flash in a sequence of 1 or 2 flashes indicating the current vehicle
selected.

Содержание 991





























































Результаты поиска

Содержание 991

Отзывы:

Похожие инструкции для 991

Бренды по названию

Популярные бренды

Directed Electronics 991, Руководство пользователя

Результаты поиска

Содержание 991

Отзывы:

Похожие инструкции для 991

Бренды по названию

Популярные бренды