Directechs NISS06, Руководство по установке, Страница: 6 / 21

6
Directed Digital Solutions NISS06
© 2019-12-30 Directed. All rights reserved.
Wiring connections
The wiring connections listed below are specific to this firmware.
Main power harness (H1), 12-pin thick gauge connector
Conn./Pin Color Description
H1/1 White Relay 3 COM – (-) Hazards Output
1
H1/2 White/Brown Relay 3 N.O. – (-) Ground
1
H1/3 Brown/Red Relay 2 N.O. – No Connection
1
H1/4 Yellow/Red Relay 2 COM – No Connection
1
H1/5
Orange/Red Relay 2 N.C. – No Connection 1
H1/6 Yellow Relay 1 COM – No Connection
1
H1/7 White Relay 3 COM – (-) Hazards Output
1
H1/8 White/Brown Relay 3 N.O. – (-) Ground
1
H1/9 Black (-) Ground
H1/10 Red (+) 12 Volt Input
H1/11 Orange/Yellow Relay 1 N.C. – No Connection
1
H1/12 Brown Relay 1 N.O. – No Connection
1
Auxiliary output harness (H2), 16-pin black connector
Conn./Pin Color Description
H2/1 Violet/Brown No Connection
H2/2 Yellow/Black (-) Lock Output
H2/3 Orange/Black (-) Arm Output
H2/4 Tan HS CAN Low
H2/5 Tan/Black HS CAN High
H2/6 Light Green No Connection
H2/7 Orange/Green No Connection
H2/8 Orange/Brown No Connection
H2/9 Violet/Green No Connection
H2/10 Green/Black (-) Push-to-Start Output
2
H2/11 White/Violet (-) Ignition Output
2
H2/12 White/Red No Connection
2
H2/13
Lt. Blue/Black (-) Starter Output
2
H2/14
Green/Red No Connection 2
H2/15 N/A No Connection
H2/16 Violet/Yellow No Connection
1. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed.
2. If these outputs are not used by the firmware, they can be configured by the installer when the module is flashed. Note that they are low current and a relay
may be necessary.