Directechs NISS06 Скачать руководство пользователя страница 20

Directed Digital Solutions NISS06

© 2019-12-30 Directed. All rights reserved.

Quick Reference Guide

Pit stop/idle mode

1

Stop

 the vehicle in a safe parking spot and 

put

 the 

gear in Park (P).

Put 

gear in 

Park

2

Press

 the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the 
vehicle is now in Pit Stop Mode.

Parking lights flash x1

14:36

Press Remote 

Start button*

&

3

It is safe to 

leave

 the engine running and 

exit

 the 

vehicle with the factory remote in hand.

Note

: We recommend that you always 

lock

 the 

doors of your vehicle when leaving it unattended.

14:36

Exit vehicle 

with remote

* Icon and remote appearance may differ depending on the model purchased.

List of available commands

Note that the information below is for many Viper, Clifford, Python, Autostart and 
AstroStart models. Icons and commands may differ depending on the model and 
options purchased. Refer to your authorized installation center for more specific 
information.

Button(s)

Actions
Press

 & 

hold

 for 1 second to lock.

Press

 & 

hold

 for 1 second to unlock.

   

*

Press

 & 

hold

 for 1 second to remote start.

 

  *

Press

 & 

hold

 for 5 seconds to activate the trunk release (optional).

* Icon and remote appearance may differ depending on the model purchased.

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, 
there are 3 possible ways you can send commands to your vehicle, using the:
•  Factory remote.
•  Aftermarket remote.
•  Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 
times quickly on your factory remote.

Vehicle takeover with Get In and Go

1

Close

 the vehicle doors, hood and trunk, then 

press

 

the Remote Start button on the transmitter to start the 
vehicle.*

14:36

Press Remote 

Start button*

2

Press

 the Unlock button on the factory or aftermarket 

remote.*

14:36

Press Unlock on 

either remote*

Complete the following steps within 45 seconds or the vehicle will shut down.

3

Enter

 the vehicle, while making sure the factory 

remote is inside with you.

14:36

Enter vehicle 

with remote

4

Depress

 the brake pedal for a minimum of 3 seconds, 

put

 the car in gear and 

drive

 off.

Ready to 

drive off

* Icon and remote appearance may differ depending on the model purchased.

Get In and Go

Get In and Go is designed to provide users with easy takeover when entering their 
Push-to-Start (PTS) equipped vehicle, once it has been remote started. 

Typically, users would have to remote start their vehicle, then get inside and press 
the PTS button to perform a takeover. There is therefore a physical action required 
to drive away. With Get In and Go, you simply remote start the vehicle, unlock the 
doors, get in and go... All that's left to do is put the gear in drive and drive off.

Содержание NISS06






















Отзывы: