Direct Supply Attendant SOLO-DS, Руководство пользователя, Страница: 28 / 33

28
Before calling for service assistance, you should make some initial checks to verify that a problem
does exist. The following describes several types of symptoms along with suggested remedies.
PROBLEM POSSIBLE SOLUTIONS
Display does not turn on Battery Operation:
• Check if batteries are installed and correctly.
• Are batteries discharged? Remove old batteries and replace
with new ones.
AC Operation:
• Is 9V AC/DC power adapter fully inserted into wall receptacle?
• Check wall receptacle for proper AC power. Try another
electrical appliance in same receptacle; does it work?
• Check circuit breaker.
• Has there been power failure?
Incorrect weight displayed Ensure that the scale platform isn’t touching an adjacent object.
Have proper operation procedures been followed?
Display shows
Err0
and shuts off If platform is not empty (user is on scale) when powering up,
display will show
Err0
and turn off. Remove any weight from
platform (have user step off scale) and power up the scale
again. If scale continues to show
Err0
and turn off, consult your
scale service representative.
Display shows a moving small
o
If the display shows a moving small o when powering up,
ensure the scale is stable and wait for a moment until the
display shows
0.0
. If scale continues to show a moving small
o
,
please consult your scale service representative.
Troubleshooting