Direct Supply Attendant SOLO-DS, Руководство пользователя, Страница: 20 / 33

20
Height Rod Operation
1. Lift headpiece on height rod to horizontal position.
2. Referring to the illustration to the right, lift headpiece and
raise it well above estimated height of user’s head.
3. Assist user onto scale.
4. Carefully lower inner height rod (press down against height
rod display cover while keeping headpiece horizontal) until
headpiece rests on top of user’s head.
5. If user is shorter than 47" (120 cm), push height rod display
cover down flush with display and then push headpiece
down until it rests on top of user’s head.
6. Read height of user as follows:
If user is shorter than 47" (120 cm), the correct height is
read at the red edge on the bottom of the headpiece.
If user is 47" (120 cm) or taller, the correct height is read at
the red edge on the outer column.
Read height at red edge
on bottom of headpiece if
shorter than 47" (120 cm).
If taller than 47" (120 cm),
read height at red edge on
outer column.
7. Referring to the illustration above, lift headpiece (while keeping it horizontal) and raise it above
user’s head.
8. Assist user off scale.
9. Lower headpiece back to vertical position and return height rod to the “stored” position
(headpiece should be vertical against outer column and height rod display cover should be flush
with the display).
Operation
(cont.)