Go to table of contents
DCS_Direct_Jet_1024UVMVP
_Getting_Started_Guide_1.2_030314
10 |
P a g e
Choosing a Location
Position the Direct Jet printer on a stable, level surface platform that doesn't move when the printer is
in operation. It is critical that the platform be stable. An unstable platform will significantly
impact the graphic printing capability of the printer. The printer itself should also be level,
both lengthwise and widthwise. Make sure that it is in a well ventilated, dust-free room.
Provide enough room around the unit to provide access to the front, back, left and right
sides of the unit.
Turning the Printer On For the First Time
DO NOT PLUG IN THE PRINTER YET
Warning:
When printer is in operation, all covers should be installed and closed with the front
cover lock screws installed and secured. The cover should only be opened by trained DCS
personnel only.
Using the provided T15 Torx tool, remove the two front cover
lock screws.
Open the front cover using both handles.
Remove the bolts securing print engine to shipping brackets with the
provided T-handle tool. Do not dispose of these bolts.
