Dion Forage Blower, Руководство оператора

Страница: 25 / 43

Page 14
FORAGE BLOWER LIFTING HOOKS
FIGURE 10
When the Forage Blower is to be lifted for transport, use
the lifting hooks (item 1).
MAINTENANCE DOOR - FIGURE 11
WARNING: Stop the tractor engine before
opening this door.
If the fan becomes jammed, the maintenance door
should be removed in order to clean it. Unscrew both
screws (item 1) then remove the door. Clean and rein-
stall the door (item 2) inserting the end inside (see
arrow) and securely tighten both bolts (item 1).
WATER SYSTEM - FIGURE 12
When the moisture content in most crops reaches 40 to
60 percent, a sticky liquid is produced when the materi-
al is blown through the Forage Blower fan. This liquid
causes a gum deposit which accumulates both on the
Forage Blower fan and on the contour. This residue
build-up reduces the machine's efficiency and causes a
"ticking" noise as well, which increases with increased
accumulation.
In order to prevent this problem, use a garden hose con-
nected to the valve (item 1) of the Forage Blower drum,
and inject a spray of water into the Forage Blower until
it is free from any material build-up. The standard water
inlet hole (item 2) is 1/8" (3 mm) dia. However, the inlet
hole should be increased to 1/4” (6 mm) dia. if Blower is
equipped with a Speed Reducer. If water doesn’t flow,
remove valve (item 1) and clean dirt in hole.
OPERATING INSTRUCTIONS
1
1
2
Figure 10 Forage blower lifting hooks
Figure 11 Maintenance door