3 Configurations on Web Interface
SBC3000 Session Border Controller
Copyright©2011-2018 Dinstar
41
Address
(Session Description Protocol) message is locked; when the peer device works at private
network, the address that sends 30 messages continuously are locked.
Unlock: remote address sending media messages is not locked.
Refresh Remote
Media Address
If this parameter is enabled, the remote address receiving media messages will be
refreshed.
Peer Signaling
Address
Lock: when a calling account is successfully registered, the access SIP trunk only
receives those calls from the registered address of the caller.
Caller From
User: the USER field of FROM header of INVITE message is extracted as caller number
Display: the DISPLAY field of FROM header of INVITE message is extracted as caller
number
Callee From
User: the USER field of TO header of INVITE message is extracted as callee number
；
Display: the DISPLAY field of TO header of INVITE message is extracted as callee
number
；
Request-uri: the USER NUMBER in REQUEST-URI of INVITE message is extracted
as callee number
；
SIP Methods
Configure the SIP request methods that can be accepted by the access SIP trunk.
If a SIP request method is not enabled, the system will reject the corresponding SIP
request.
By default, the INVITE request, REGISTER request and SESSION DISCONNECT
request are always accepted.
Core SIP Trunk
Core SIP trunk can realize the connection between SBC3000 and the core network. On the
Service
Core SIP
Trunk
page, you can configure the parameters of core SIP trunk.
