3 Configurations on Web Interface
SBC3000 Session Border Controller
Copyright©2011-2018 Dinstar
20
Figure 3-9 Calls Status
Table 3-9 Call Status
Status
Init
: an invite request for calling is received and the call is initiated;
Outgoing
：
the request for routing out the call is sent , and the system is waiting for response
Early
: the 18x response is received
Completed
: the 2xx response is received, and the system is waiting for the ack message
Answer
：
the ack message is received, and the call is set up
RTP Port
The local RTP port of the call. If the RTP port is displayed as ‘0’, it means the RTP session has
not been connected successfully
Duration(s)
The duration of the call
Name
The name of the call, which will be used when the call goes through access network’s SIP trunk,
core network’s SIP trunk or access network
Caller
The caller number of the call
Callee
The callee number of the call
Codec
The codec adopted by the call. If it is a transcoded call, the source codec is different from the
destination codec
RTP
The number of RTP messages that received or sent. The statistics is collected every five seconds
Peer IP
The peer IP address and peer RTP port
Register Status
On the
Overview
Register Status
page, the registration statuses of terminal users on SBC3000 are displayed.
