4 Configurations on Web Interface
DAG1000-1S/2S/4S User Manual
Copyright©2011-2017 Dinstar
50
Primary/Secondary
Authenticate ID
SIP service subscriber’s ID for authentication; it can be identical to or
different from SIP User ID.
Primary/Secondary
Authenticate
Password
SIP service subscriber’s password for authentication
Offhook Auto-Dial
An extension or phone number is pre-assigned here so that the number
is automatically dialed as soon as user picks up the phone
Auto-dial
Delay
time
How long auto-dialing will be delayed
Port Select
It specifies the policy for selecting a port for ringing in the port group
Ascending: the device always selects a port from the minimum
number.
Cyclic ascending: the device always selects a port from a number
next to the number selected last time. If the maximum number was
selected last time, the next selected number is the minimum number.
The sequence moves in cycles like this.
Descending: the device always selects a port from the maximum
number.
Cyclic descending: the device always selects a port from a number
next to the number selected last time. If the minimum number was
selected last time, the next selected number is the maximum number.
The sequence moves in cycles like this.
Group ring: all ports ring at the same time
Pickup UP on group
When one port rings, user can dial ‘*#’ to pick up the call from other
ports under the same port group.
Port
Select ports for this port group
4.8.2
IP Trunk
A peer-to-peer VoIP call occurs when two VoIP phones communicate directly over IP network
without IP PBXs between them. IP trunk helps establish peer-to-peer call between gateway
and VoIP phones. IP trunk will be used in routing configuration.
