4 Configurations on Web Interface
DAG1000-1S/2S/4S User Manual
Copyright©2011-2017 Dinstar
25
Figure 4-12 Qos
4.4.5
LAN Qos
The LAN Qos function gives network ports three priorities (namely low, middle and high),
and allows you to limit the network speed of the ports.
Figure 4-13 LAN Qos
4.4.6
DHCP Server (Route Mode)
When the DAG1000 device works under the route mode, it works as a small router and you
can use its DHCP service (the device serves as a DHCP server) in the network.
“Start address” and “end address” of the address pool determine the range of IP addresses
which are automatically assigned to other network equipment by DAG1000.
“IP Expire Time” means the service time of an assigned IP address. When the service time
expires, the IP address will no longer be used by network equipment.
Subnet mask, default gateway, DNS server will be transmitted to network equipment
through the DHCP protocol. Generally, they are the same with those of the DAG1000
device.
