3590EXTLWBCIO, CPWELW series indicator
E-LW_01_14.03_EN_U
27
7. DISPLAY OF METRIC DATA (inFO)
The indicator is fitted with a function named “INFO”, thanks to which it is possible to view the configuration metric data:
-
First range capacity, first range division.
-
Second range capacity, second range division.
-
Third range capacity, third range division.
-
Minimum weigh (“e”)
NOTES:
-
The minimum weigh corresponds to 20 net weight divisions.
-
The data of the second and third range appear only if actually configured.
To display the metric data:
-
Press in sequence the
2ndF
and
C
key
-
“METROLOGIC INFORMATION” is displayed
-
The display will show the number of the scale, the type of displayed data and its value.
-
Press the
F6
key to quickly scroll the data:
-
Press the
F7
key to scroll the previous data backwards.
-
Press the
C
key to return to weighing.
8. FILLING IN ALPHANUMERIC TEXT
The indicator offers the possibility of using 15 CONFIGURABLE INPUT TEXTS (for example LOT, OPERATOR, SHIFT,
etc.), each made up of 16 heading characters and 32 content characters.
When entered in the TECHNICAL SET-UP (see
<< tXt >>
), these may be printed later on, if programmed in the printouts;
or these may be used as a reminder.
1)
Press
F4
for an instant one can enter the contents of the programmed INPUT TEXTS:
2)
The display shows “in. XX” on the first line, in which XX is the index of the free text (from 0 to 14) THE HEADING
on the second line of the input text (or “Empty…” if empty).
3)
Use the arrow
keys to select the text to be filled in and press
ENTER:
now one can enter the alphanumeric
text in the second line of the display, (see chapter “ENTERING ALPHANUMERIC TEXT”).
4)
Press
ENTER
to store and pass on to the following stored TEXT; by confirming the last entered text one returns
automatically to the weigh functioning;
5)
it is possible to exit also with the
C
key while in the text selection modification phase.
NOTE:
a.
The entered texts remain in storage until these are substituted or cancelled.
b.
If no text has been configured, the pressing of the F4 key has no effect.
8.1 QUICK MODIFICATION OF AN INPUT TEXT
By linking the number of a specific input text to the function
113
(preamble function in the
<< F.KEYS >>
step,
TECH.MAN.REF.
), it is possible to access directly to the modification of it with a direct key, for example F1 key to quickly
access the text 0, and F2 key to quickly access the text 1.
