DINGO D4040P, Руководство пользователя, Страница: 16 / 24

Dingo D4040P User Guide
16
Retrieving historical data
In addition to storing today’s performance data, the controller
can display information about the last 99 days of operation.
Historical performance information can be accessed from the
DATA sub menu (see figure 6). After a long-push on DATA,
short-push until you see HIST. A long-push on HIST will put you
in “history mode”, where you can cycle through each day’s data.
In the history display, DAY 1 is yesterday and DAY 99 is 99 days ago.
(Note: the controller actually stores 512 days data, but this is only accessible via the
computer interface)
History Mode
Thin arrow = short push
Thick arrow = long push
BATV
CHRG
LOAD
IN
OUT
DATA
SET
DAY 1 IN OUT VMAX VMIN FTIM SOC NEXT BACK EXIT
DAY 2 DAY 99 DATA
VMAX VMIN FTIM SOC TEMP SOLV HIST
DAY 2 IN OUT VMAX VMIN FTIM SOC NEXT BACK EXIT
DAY 3 DAY 1 DATA
DAY 3 IN OUT VMAX VMIN FTIM SOC NEXT BACK EXIT
DAY 4 DAY 2 DATA
DAY 99 IN OUT VMAX VMIN FTIM SOC NEXT BACK EXIT
... ... ... ...
... ... ...
DAY 1 DAY 98 DATA
Long push to adjust
(0-100%)
Fig. 6