Dinghua DH-G200, Руководство пользователя

Страница: 6 / 28

6
Name Usage How to use
Limit bar
Limit the downing of
upper
Rotating to suitable location
Angle fine tune
Fine tune the BGA angle Rotate the micrometer
Para head move up and down
the handle
Adjust the position of
upper heater
Rotate the knob
Upper heater area Automatic heating Press manual or auto
Top heater hot air nozzle
Control the hot air more
evenly
LED lamp Lighting when working
Optical positioning structure
Transmit the image to the
displayer
Pull it out
PCB fixture Fixed the PCB
Bottom nozzle
Control the hot air more
evenly
Workbench X axis fine tune
Adjust X axis of workbench
Rotate micrometer
WorkbenchY axis fine tune
Adjust Y axis of workbench
Rotate micrometer
Bottom heater height
controller
Control the distance between
the bottom heater and PCB
board
Rotate the knob
Start Heat automatically Press the button
LED lamp switch LED switch Press the button
Emergency stop
Stop the machine
immediately
Press the button
Touch screen Operating the machine
USB connector Transfer files USB connector
Display
Diplaying the image of
BGA Good video connector,
power supply cord
Laser Turn on/off the laser Press the button
Cross flow fan
Cooling the PCB board after
complete the work
Cross flow fan
Clip controller Adjusting the clip Hold by hand
IR preheating zone Preheating the PCB board
sensor
Test the fact temperature
Connect the sensor wire
Para brightness adjustment Optical brightness of level
adjustment
Horizontal rotation
Enlargement button
Enlarge the image Press the button
Narrowing button
Narrow the image Press the button