15
©
Dinel, s.r.o. RFLS–28
7. Setting elements
Fig. 3: RFLS-28 sensor setting up
The RFLS-28 switch can be set in two ways, namely using the magnetic pen
M
(variants RFLS-28_-
_-_-P-_-M, RFLS-28_-_-_-PD-_-M a RFLS-28_-_-_-PD-_-MW) or the programming wire
W
(vari-
ant RFLS-28_-_-_-PD_MW). Remote parametrization only allows basic settings (interface of two
media).
For variants without the remote parametrization option, setting must be provided before the sensor
is installed in the tank. This setting is performed by placing the magnetic pen on sensitive spots
marked as
M
/ON or
M
/OFF located on the sensor enclosure in the following modes:
•
Quick settings
- the user does not know precisely to what medium the sensor should be set,
he only wants to put the sensor into operation (usually upon receiving it) and check to see if
the sensor is generally functional.
•
Basic settings
- the user has the medium available and can perform on the sensor its flooding
and drainage.
•
Medium window settings
- the user has the medium available and can perform on the sensor
its flooding and drainage.
M
OFF
M
ON
Orange LED
upper view
Green LED
Sensitive spot
