6
INSTALLATION SITE
6.1 General notes
The heat pump is intended for indoor installation.
The mounting surface must be smooth, solid and
load-bearing. If necessary, the heat pump must
be levelled by shimming.
The installation site of the heat pump must be
chosen so that service work can be performed
easily. This is ensured by a free space of about 1
m at the front and both sides of the heat pump.
6.2 Sound emission
Owing to the sound insulation the heat pump
emits very little noise. But placing a suitable
decoupled rubber mat underneath the heat
pump base frame is recommended in order to
prevent any sound conductance to the foundation,
especially in case of uneven foundations.
6
7
INSTALLATION SITE
INSTALLATION
INSTALLATION
7.1 Connection of the heating system
Before connecting the heat pump to the heating
system, the heating plant should be flushed
thoroughly to prevent any particles to flow through
the heating circuit which could impair smooth
heatpump operation.
Flexible pressure hoses should be used for
connections in order to prevent noise from being
conducted to the heating circuit.
The completed heating circuit must be filled,
ventilated and checked for leakage. Where the
risk of frost exists the filled system must remain
in operation continuously so that frost damage is
precluded.
7.2 Connection of the heat source
Connect the water lines from the well to the flow
and return lines of the heat source.
For this observe the refrigeration and hydraulic
plans.
The well water must be of the water
quality specified.
CAUTION !
Wärmepumpe
1 m
0,2 m
1 m
1 m
Heat pump
Содержание WI 40CG
Страница 34: ...34 Notes...
Страница 35: ...35 Notes...