Installation
NEW WALL CONSTRUCTION
1. Select a suitable location that is not susceptible to moisture and is away from
drapes, furniture and high traffic.
2. Place the fireplace in the desired location to see how it will look in the room.
3. Mark the desired location on the floor.
4. Use studs to frame an opening of 680mm wide X 585mm high X 229mm deep.
Option 1
The power cord can be run from behind the trim and along the wall to an outlet near
the fireplace.
Option 2
A new outlet can be installed inside the framing construction. Plug the fireplace into
a 10-13Amp/230-240 volt outlet. If the cord does not reach you may use a 3-core
type extension cord rated for a minimum of 10 Amps.
EXISTING FIREPLACE
1. Seal all drafts and vents with a non-fibrous insulation material to prevent any
chimney debris from falling onto the fireplace. Do not install into an existing fire-
place that is prone to dampness.
2. Cap the top of the chimney flue to prevent rain from entering.
3. Plan your electric power supply.
4. The power cord can run along the front of the hearth to an outlet near the fire-
place.
11
