Operation
IMPORTANT
- OBJECTS OR CLOTHING MUST NOT BE
PLACED ON THIS HEATER.
Before using the heater ensure that all warnings and instructions
have been read carefully.
To activate the heater simply plug it in. Neon indicating lights
located at the controls area will illuminate when the appliance
is plugged into the mains. This indicates the appliance is
energised and ready for use.
CONTROLS
Fig. 3
Thermostat
The Thermostat, see
Fig.3
controls the heat output according
to the room temperature. This ensures that the heater will not
produce heat unnecessarily when the room is warm. To set the
temperature you require, turn the thermostat knob clockwise
until the required setting is reached. Alternatively to heat a
cold room quickly, turn the thermostat knob up fully. When the
room has reached the desired temperature, turn the thermostat
knob anti-clockwise until the thermostat just clicks off. The
heater will now automatically operate at this temperature. The
thermostat also has a frost protection setting marked ‘ ‘.
This setting is useful in areas such as garages, to prevent frost
damage. If the thermostat is set to its minimum setting ‘ ’,
the heater will cycle on and off to maintain a temperature of
approximately 5° to help protect against frost.
Note – Should the heater fail to come on when the thermostat
is at a low setting, this may be due to the room temperature
being higher than the thermostat setting.
POSITIONING THE HEATER
Select the position for the heater ensuring there is clearance
from any furniture and fittings of at least 300mm above the
heater and 150mm each side and 300mm from the control
and end panel. We recommend maximising the clearance
where possible
.
Models & General Information
MODELS
Model
Description
Power
(W)
OCR15
5 fin, thermostat, three heat settings &
Neon
1500
OCR15Ti
5 fin, thermostat, three heat settings, neon
& electro mechanical timer
1500
OCR20
7 fin, thermostat, three heat settings &
Neon
2000
OCR20Ti
7 fin, thermostat, three heat settings, neon
& electro mechanical timer
2000
OCR20Tie
7 fin column, thermostat, three heat
settings, neon & electronic timer
2000
GENERAL
The radiator is designed for operation on an AC electricity
supply, and is suitable for use in domestic dwellings and similar
indoor locations.
The radiator is fitted with castors and a handle for ease of
movement. A rotary selector switch provide the ability to
choose an available heat output and an adjustable thermostat
enables the room temperature to be controlled accordingly. It
is supplied with a cord and plug and is ready for use once the
castors have been correctly fitted.
Thermostat
Off/Heat selection
switch
Neon Indicator
Timer - Ti(e)(b) models
Cable Wrap
Fig. 2
