background image

.

Heat Selector Switches (see Fig.3)

 

Heat  selection  is  provided  via  a  rotary  switch  offering  four 
settings. The heat output can be altered to suit the application, 
conditions and for improve the economy of operation.

Available output options are as follows:

Switch setting

Model

O

I

II

III

OCR15(Ti(e))

Off

700W

800W

1500W

OCR20(Ti(e))

Off

900W

1100W

2000W

Timer Models

DIGITAL TIMER

 

(Tie models)

13 : 17

ON
OFF

ADVANCE

AUTO              

P1

 MANUAL   ON          

Fig. 4

IMPORTANT:

 Remember to observe all safety warnings 

when operating the heater on auto setting, either attended or 
unattended.
The timer allows you to select ‘

AUTO

’ or ‘

MAN ON

’ by pressing 

the ‘MODE’ button until the required MODE appears at the 
bottom of the timer display.

AUTO

’ MODE allows the heater to switch ON and OFF 

according to a set 24 Hour program period (see ‘Setting 
Programs’ section below).

MAN ON

’ MODE allows power to the heater uninterrupted by 

the program settings. 

Key Lock

If ‘

ENTER

’ and ‘

MODE

’ are pressed within 1 second, the keys 

will be locked. The user will know the keys are locked as the 
lock symbol ‘ ’ will be displayed on the top left hand corner 
of the screen. To unlock the keypad, press ‘

ENTER

’ and then 

MODE

’ within 1 second.

Initial Operation

 

For initial use, plug the heater into a regular household power 
point and turn the power on.  The timer is now ready to be set 
up for use.

Setting Current Time

1. Hold the ‘

PROGRAM

’ button until the clock symbol   

appears on the screen.  The user can now set the clock. 
2. The hour digit will flash. To adjust the hour use the ‘

-

‘ & 

+

’ buttons. Confirm the hour digit by pressing ‘

ENTER

’. 

3. Once ‘

ENTER

’ has been pressed the minutes will flash.  

To adjust the minutes use the ‘

-

‘ & ‘

+

’ buttons. Confirm 

the minute digit by pressing ‘

ENTER

’.

4. The timer now returns to the default display.
5. To reset incorrect time, repeat previous steps.

Once the correct time is set, a total of four ON/OFF time 
programs can be set for operation. 

Setting Programmes

Press the ‘

PROGRAM

’ key to set the programs.

 

You are now setting the programs starting with P1 ‘ON’.

SETTING P1 ON TIME

1. To set the hour use the ‘

-

‘ & ‘

+

’ buttons. Confirm the 

hour digit by pressing ‘

ENTER

’. 

2. To set the minutes use the ‘

-

‘ & ‘

+

’ buttons. Confirm 

the minute digit by pressing ‘

ENTER

’.

Note: The minutes can only be set in 10 minute blocks in 
programme ‘

MODE

’. 

SETTING P1 OFF TIME

3. To set the hour use the ‘

-

‘ & ‘

+

’ buttons. Confirm the 

hour digit by pressing ‘

ENTER

’. 

4. To set the minutes use the ‘

-

‘ & ‘

+

’  buttons. Confirm 

the minute digit by pressing ‘

ENTER

’.

Repeat steps 1 to 4 to programme P2, P3 & P4. After 
programming P4 ‘OFF’ you automatically exit to the default 
display.
At any time while programming the timer you can press the 

PROGRAM

’ button to exit to the default display.

Note: If the ‘ON’ time is the same as the ‘OFF’ time the appliance 
will ignore the program. 

The Advance Function

When in ‘

AUTO

’ MODE, if the ‘+’ button is pressed for longer 

than  2  seconds  the  programme  will  ADVANCE  to  the  next 
setting programmed and will only revert back to the program 
when the subsequent programme time is reached. When the 

ADVANCE

’ function is running the ‘

ADVANCE

’ segment will 

be displayed on the LCD screen. If the ‘

-

‘ button is pressed 

when the ‘

ADVANCE

’ programme is running the ‘

ADVANCE

’ 

feature will be automatically cancelled and the programme will 
run as normal. 

Note - Timer Memory Back Up Batteries

 - Once the heater has 

been left plugged in with the socket switched on for at least 
72 hours the timer’s memory back up batteries will be fully 
charged.
Once the timer batteries are fully charged, if there is a power 
cut or if the heater is disconnected from the mains for less than 

Содержание OCR15









Отзывы: