Dimplex LI 40AS, Руководство по эксплуатации

Страница: 21 / 48

www.dimplex.de EN-9
English
11
11 Device Information
1 Type and order code
LI 40AS
2 Design
2.1 Controller External
2.2 Installation location / degree of protection according to EN 60529 Indoors / IP 21
2.3 Antifreeze condensate tray / heating water
Heated / yes
1
1. The heat circulating pump and the heat pump manager must always be ready for operation.
2.4 Performance levels 2
3 Operating limits
3.1 Heating water flow / return flow °C up to 58 ± 2 / from 18
3.2 Air (heat source) °C -25 to +35
4 Performance data / flow rate
4.1 Heating water flow rate
/ internal pressure differential
A7 / W35/30 m³/h / Pa
6.2 / 3900
A7 / W45/38 m³/h / Pa 4.3 / 1900
Minimum heating water flow rate A7 / W55/45 m³/h / Pa 3.0 / 950
4.2 Heat output / COP
2 3
2. These data indicate the size and capacity of the system according to EN 255 (10K at A2) and EN 14511 (5K at A7) without weather-proof protective cover. For an analysis of the
economic and energy efficiency of the system, other parameters, in particular the defrosting capacity, the bivalence point and the regulation, should also be taken into considera-
tion. The specified values have the following meaning, e.g. A7 / W35: External air temperature 7 °C and heating water flow temperature 35 °C.
3. The data are valid for “free extracting” and “free venting” installation; fan in star connection.
EN 255 EN 14511
at A-7 / W35 kW / ---
4
4. 2-compressor operating mode
24.3 / 3.1 23.8 / 3.0
kW / ---
5
5. 1-compressor operating mode
13.8 / 3.2 13.5 / 3.1
at A2 / W35 kW / ---
4
29.6 / 3.9 29.3 / 3.8
kW / ---
5
17.1 / 4.0 16.8 / 3.9
at A7 / W35 kW / ---
4
35.7 / 4.4
kW / ---
5
20.0 / 4.6
at A7 / W55 kW / ---
4
33.1 / 2.7
kW / ---
5
17.6 / 2.7
at A10 / W35 kW / ---
4 38.5 / 4.8 38.1 / 4.7
kW / ---
5
22.0 / 5.0 21.7 / 4.9
4.3 Sound power level device / outdoors dB(A) 64 / 70
4.4 Sound pressure level at a distance of 1 m (indoors)
6
dB(A)
6. The specified sound pressure level corresponds to the operating noise of the heat pump in heating operation with a flow temperature of 35 °C.
The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
60
4.5 Air flow rate
with an external static pressure differential of
m³/h / Pa
11000 / 0
m³/h / Pa
9500 / 15
7
7. With an external static pressure differential greater than 15 PA it is recommended to operate the fan in delta connection.
5 Dimensions; weight and filling quantities
5.1 Device dimensions without connections H x W x L mm 2100 x 1735 x 952 (750)
5.2 Device connections to heating system Inch 1 1/2'' external thread
5.3 Weight of the transportable unit(s) incl. packing kg 590
5.4 Refrigerant; total filling weight type / kg R404A / 11.8
5.5 Lubricant; total filling quantity type / litre Polyolester (POE) / 4.1
6 Electrical Connection
6.1 Nominal voltage; fuse protection V / A 400 / 25
6.2 Starting current with soft starter A 30
6.3 Nominal power consumption
A2/W35 / max. consumption
2 4
kW
7.9 / 12.6
6.4 Nominal current A2/W35 / cos

4
A / ---
14.2 / 0.8
6.5 max. power consumption of compressor protection
(per compressor)
W
70; thermostatically controlled
7 Complies with the European safety regulations
8
8. see CE declaration of conformity
8 Additional model features
8.1 Type of defrosting Reverse circulation