6
www.dimplex.com
Stove Installation
WARNINg:
This stove is
not to be used on elevated
surfaces.
Site Selection
!
NOTE:
A 15 Amp, 120 Volt
alternating current (VAC)
circuit is required. A dedicated
circuit is preferred but not
essential in all cases. A
dedicated circuit will be
required if, after installation,
the circuit breaker trips or
fuse blows on a regular basis
when the heater is operating.
Additional appliances on the
same circuit may exceed the
current rating of the circuit
breaker.
!
NOTE:
When the heater is in
use, this product draws a high,
continuous electrical current.
Not all electric receptacles are
designed to work with high,
continuous currents. If you
plan on using this unit in an
old, worn, or loose receptacle,
or are unsure if the receptacle
is suitable, please have it
inspected by a qualified
electrician prior to using this
product.
WARNINg:
Ensure the
power cord is not installed so
that it is pinched or against a
sharp edge and ensure that
the power cord is stored or
secured to avoid tripping or
snagging to reduce the risk of
fire, electric shock or injury to
persons.
Construction and electrical
outlet wiring must comply
with local building codes and
Quick Reference guide
①
The information regarding the
model of your electric stove can
be found on the label located on
the back of the unit.
②
If you have any technical
questions or concerns regarding
the operation of your electric
stove, or require service contact
customer service.
