Operation
FUNCTION
After the power is turned on, the device beeps twice and enters the standby state,
all functions and displays are turned off. (note: If you press the On/Off button
within 10 seconds after turning off the heater or directly press the On/Off button
in the heating state, the fan will delay 10 seconds before turning off. If you switch
the device from heating air to cooling air and the cooling state hasn’t reached 10
seconds, the fan will still delay 10 seconds before turning off. If it has entered cooling
state for more than 10 seconds, all functions can be directly turned off.
ON/OFF
When in standby, only this button
(1)
is operational. After turning on, oscillation,
timer and temperature settings are disabled and the speed indicator is always on.
The default air speed is level 2, the level 2 indicator turns on, and the heating air is
turned off. Press this button
(1)
again to enter the standby state.
COOLING AIR SPEED
When powering on for the first time, the air speed indicator light is always on, and
the speed is level 2 (it starts in level 4, then switches to level 2 after 3 seconds, and
only the level 2 indicator lights up). Press this button
(3)
to switch the speed in the
following sequence: 1..2..3..4..5..1..etc. The corresponding indicator LED lights up
accordingly.
TIMER SETTING
After pressing the Temp/Timer Function button
(8)
the timer LED light comes on
and the unit enters the timer setting function. You can adjust the timer by pressing
the '+'
(9)
or '-'
(7)
button to the desired working time. The adjustment does not
cycle. The timer setting range is 1-12 hours and in 1 hour increments. The LED Display
(11)
flashes and displays the set working time. If the set working time is 0, the timer
setting will be cancelled. If there is no operation of the timer button for 5 seconds or
any other button, except the On/Off button
(1)
, the device will exit the timer setting
and confirm the currently set time.
TEMPERATURE SETTING
After pressing the Temp/Timer Function button
(8)
and the temperature LED light
comes on, the unit enters the temperature setting function. You can adjust the
temperature by pressing the '+'
(9)
or '-'
(7)
button to the desired temperature. The
adjustment does not cycle. The temperature value can be set from 15°C to 35°C in
increments of 1°C.
a) After setting the desired temperature, the unit will exit the timer setting and
confirm the currently set time, if the temperature '+'
(9)
or '-'
(7)
buttons are not
selected for 5 seconds or any other button, except the On/Off button
(1)
.
11
