Operation
3) After the ECO mode is turned on, the heating wire turns to low level operation
when the ambient temperature rises to 18°C. When the ambient temperature drops
2°C below the set temperature (that is, 16°C), the heating wire turns to high level
operation. During ECO function operation, the power is high and low level, the
cooling air function is not adjustable, and other functions are normal. The working
cycle of the button control is: low level heating air - high level heating air - ECO
mode - low level heating air...... Note: The high level and low level heating air operate
at level 2 cooling air in the heating state, and the cooling air speed is not adjustable.
HORIZONTAL OSCILLATION
In the power-on state, press the Horizontal Oscillation button
(5)
to switch on/off
the horizontal swing function, and the swing LED indicator shows its working status
accordingly.
VERTICAL OSCILLATION
In the power-on state, press the Vertical Oscillation button
(6)
to switch on/off
the vertical swing function, and the swing LED indicator shows its working status
accordingly.
The operating rules of vertical oscillation are described as follows:
a) The swing angle is 70°. When switching directions, the device first pauses for 2
seconds, and then swings to the other direction.
b) When the device is powered on for the first time, the vertical oscillation function
turns on, the motor first finds the origin [swings up 30°, pauses 9 seconds, swings
down 70°, pauses 15 seconds (if the swing angle is not 30° or 70°, the motor still
needs to operate for the time required for swinging 30° and 70° before proceeding
to the next step). After that, the device swings up and down at an angle of 70°.
c) Under normal shutdown conditions (press the On/Off button
(1)
or the timer
ends), the vertical swing motor returns to the lowest point of the swing before
shutting down.
SCREEN OFF
In the power-on state, press the Screen Off button
(2)
to enter the screen off state.
The LED screen and indicator will turn off. You can press any button to restore the
last display state.
OTHER
a) Tilt protection function. If the machine tilts down, all functions are turned off and
the indicator lights all turn off. It enters the standby state after recovery.
b) Uninterruptible power memory function. If it is not the first time to turn on, press
the On/Off button
(1)
in the standby state to turn on and keep the state before
shutting down, except for the timer function.
13
