10
www.dimplex.com
3. Remove one Phillips screw to
release the electrical box cover
in the bottom, right corner of
the fireplace (Figure 4).
4. Carefully remove the electrical
box cover from the fireplace
as wires are fed through the
strain reliefs on the cover and
are connected within.
CAUTION:
Partially reflective
glass is not tempered. Do not
bump or drop the partially
reflective glass to avoid breakage
and personal injury.
• Remove partially reflective
glass from fireplace.
2. Remove six Phillips screws
that fasten the media tray
and two screws that
fasten the front panel tabs
(Figure 3). Carefully remove
both components.
Fireplace Installation
Figure 5
Wires to
controls
Wire connectors
Junction
Box screw
Figure 6
Junction Box screws (3)
Figure 4
Electrical box
Screw
Figure 3
Front Panel
Front Panel tabs (2)
Media Tray screws (2)
