15
Operation
continue running before turning
off.
!
NOTE:
The unit can be operated
in
Heat Only Mode
. When the unit
is only running with the heater,
the
icon will continuously
be displayed on the Floating
Display
TM
.
!
NOTE:
The heater may emit a
slight, harmless odor when first
used. This odor is a normal
condition caused by initial heating
of internal heater parts and will
not occur again.
D & E. Thermostat Controls
Adjusts the temperature set point
to your individual requirements.
Once the desired set temperature
is reached the heater will turn off.
The heater will cycle on and off to
maintain the desired set temperature.
The default temperature setting is
72°F (22°C).
→ Adjusted by pressing the
to
decrease the setpoint and the
to increase the setpoint on the unit
or the remote.
• The Floating Display
TM
will indicate
the temperature setpoint as it is
adjusted.
!
NOTE:
Holding the
and
the
buttons down for two
seconds,
on the
manual controls
,
will change the temperature from
°C to °F, or vice versa.
Disable Heat
If desired, depending on the season,
the heater on the unit can be
disabled. The unit will operate in the
same fashion, with remainder of the
controls.
Pressing the
and
buttons
on the
manual controls
at the same
time
and holding for 2 seconds
will
disable and enable the heater.
!
NOTE:
When the heater has been
disabled and either the
or
the
is pressed the Floating
Display
TM
will indicate "--".
F. Color Themes
Different presets of ambient lighting
color combinations contained in the
unit.
→ Changed by repeatedly pressing
the corresponding button on the
remote or the unit.
•
Cycles through the different
preset ambient lighting settings
of the unit, this includes different
combinations of colours of the
flame base and media lighting.
!
NOTE:
The last theme of the cycle
is a prism where the unit cycles
through a variety of colours.
Pressing the
button stops the
