P750LV2.1 industrial gate motor manual
2
ATTENTION To prevent electrical shock, disconnect from power source before installing or service
ATTENTION Electricity and power motors associated accessories could be fatal or at least cause seriously
injury.
All main voltage wiring must be installed by a licensed electrician.
ATTENTION Additional safety device MUST be fitted such as Photo Electric Beam, Loop Detectors.
ATTENTION Before do the manual release, the mains power switch must be off even there is no power.
ATTENTION Before power on, the manual release MUST engaged
ATTENTION Gate opened stopper and closed gate stopper MUST be installed.
Contains
1. General description ------------------------------------------------------------------------------------------ -- 3
2. Specifications --------------------------------------------------------------------------------------------------- 3
3. Control Board Layout ----------------------------------------------------------------------------------------- 4
4. DIP switch functions------------------------------------------------------------------------------------------- 5
5. Control Board Set up ------------------------------------------------------------------------------------------ 5
6. Inverter setting------------------------------------------------------------------------------- ------------------ 8
9. Inverter Setting-------------------------------------------------------------------------------------------------- 10
10. Chain drive ------------------------------------------------------------------------------------------------
11
11. Condition of sales---------------------------------------------------------------------------------------------- 12
