P750LV2.1 industrial gate motor manual
4
1. General Descriptions
The P750L sliding gate motors was designed for heavy duty industry track gate or cantilever gate. Heavy
duty three phase industry motor driven by VSD (variable speed drive), gate can run at different speeds.
The controller can receive the signals from swipe card, loop detectors, remote control, photo-electric
beams and any kind of access control system. Galvanised metal sheet and powder coated high quality
cabinet (1.5mm thickness) has remove door (P750) and plenty of room for the access control accessories
including din rail mounting. 50VA transformer (12V/24v/2A) can directly drive magnetic lock, warning
lights etc.
Technical Specifications
Power supply
230/240V AC at 10A
Output voltage
230V AC three phase (via) inverter, Max. 0.75KW or 1.5KW
Motor rate
Three phase two poles 0.75KW
Gate type
Track or cantilever
Drive speed
Up to 700mm/sec (with big drive gear)
Max. Gate length
No limitation
Fully programmable
Auto close time, PE trig close time etc.
Accessories power supply
12V@2A or 24@2A, Max. 50VA, protected by 1A fuse
2. Control Board layout
2.1 View of Control board
CONTROL INPUIT AND BUTTON
