Digium TDM400P, Руководство пользователя

Страница: 27 / 72

Release 1.0 Digium, Inc. Page 27
Chapter 2: Card Installation
6. If your card has any red FXO modules, add the following:
fxsks
This uses kewl start signalling which is loop start with disconnect
supervision. For example, a TDM04B card would be configured as the
following:
fxsks=1,2,3,4
Note: You should have identified the type of TDM400P card when
you received it. If you are not sure, refer to Module Identification
on page 16 for assistance.
7.
If your card has any green FXS modules, add the following:
fxoks
This uses kewl start signalling which is loop start with disconnect
supervision. For example, a TDM40B card would be configured as the
following:
fxoks=1,2,3,4
An example TDM22B card configuration would be:
fxoks=1,2
fxsks=3,4