Digium TDM400P, Руководство пользователя

Страница: 20 / 72

Page 20 Digium, Inc. Release 1.0
Chapter 2: Card Installation
There are multiple standard configurations in which the TDM400P card
may be purchased. Each configuration consists of one to four FXS and/or
FXO modules.
It is easiest to identify your card by understanding the naming scheme for
each card. The first digit provides the number of FXS modules present on
the card. The second digit provides the number of FXO modules present
on the card.
Hardware Installation
1.
Now that you are acquainted with your card, power down your com-
puter and unplug it from its power source.
2. Attach a static strap to your wrist and open the case.
3.
Remove the bracket place holder and insert the card into a 3.3 or 5 volt
PCI slot (PCI 2.2 or greater). See Figure 3.
Caution.
Only qualified service personnel should continue with
hardware installation and configuration of the TDM400P card.
Users should not attempt to perform these functions themselves.