Digium 1G101F, Руководство администратора

Страница: 41 / 100

Chapter 2: Unit Installation
„
Also Continue Using Default Install IP Address - Leaving this
option enabled will allow the Gateway Series appliance to listen for
network requests on its factory default IP address.
Note: For security purposes, it is recommended that this feature be
disabled after initial IP configuration is complete. After this feature is
disabled, the Gateway Series appliance will be accessible only from
the IP address that is assigned by the DHCP server or statically
configured.
– Factory Default IP Address - Displays the factory default IP
address assigned to the Gateway Series appliance. This address is
accessible only on the first physical interface for untagged traffic.
„
Default Install Mask - Displays the factory default network mask of
the Gateway Series appliance.
„
DNS Addresses - Specify up to 3 DNS servers to be used by the Gate-
way Series appliance. A DNS server may also be referred to as a nam-
eserver.
„
IP for SSL Certificate - Take the IP address for SSL certificate used
to secure the admin interface from a specified Interface #.
The Gateway Series appliance is capable of loading its configuration from
a configuration server on reboot. This allows Gateway Series appliances
to be quickly and easily deployed at multiple locations with minimal
interaction from an administrator.
In order to generate a configuration to place on a configuration server,
configure a Gateway Series appliance, generate a backup from the web
Digium, Inc. Page 41