Digitus DN-95639 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 26

Digitus DN-95639 Скачать руководство пользователя страница 16

16

9.

Software user guide

1.

Software Introduction

ATS monitoring and management software using the embedded Web Server

system, supports HTTP and SNMP. It helps to monitor the total load current;

input/output of the voltage timely so that the user can manual or automatic

switch the input power between source A and source B to ensure uninterrupted

power supply of the crucial devices. When abnormality detected, the software

will send E-mail/TRAP message to administrator. In addition, the system support

system operation and alarm records inquiring and exporting. It supports multiple

account and single user logging.

2.

Software configuration

2.1.

Device default settings

Device default IP: 192.168.1.163

Default username: admin

Default password: admin

Note: Both the default username and password are in lowercase, user

cannot log on to the interface with uppercase.

2.2.

Device configuration when first log in

•

Connect the device to PC directly.

•

Rework the network configuration of PC, make sure the changed PC IP

address and the IP of the ATS is in the same segment, the default of the IP

address is 192.168.1.163; Default subnet Mask is 255.255.255.0; Default

gateway is 192.168.1.1. For instance, change the network configuration of

the PC to IP: 192.168.1.145; log on to the management interface.

•

Click the "Network Config" on the left menu to rework the IP of the ATS,

see the below interface, change the IP address of the ATS and make sure it

is in the same segment where the PC IP is.

•

Restore the PC network configuration, Sign into the management interface

with the changed IP address of ATS.

«
...
14
15
16
17
18
...
»

Содержание DN-95639



























Отзывы:

Нет отзывов