13
12.1.
Enter the corresponding code, for instance: Enter 1 then press Enter to
select input A as the preferred power input. The interface will return to
Device Manager interface. See the below window: Preferred Source:
Source A means that input A was select as the primary power source
13.
Set the Re-transfer time, the path are: Main Menu=>1 (Device Manager) =>2 (Set
Switchover Time) enter the value preferred then press Enter. The Re-transfer
time ranges from 10 to 60 seconds. The ATS will transfer to the preferred input
power after defined time when user give the order to transfer or the preferred
input line recover from power failure.
14.
Define the threshold voltage and current The Path are Main Menu=>2 (- Set
Current And Voltage Limit)
