Note:
This command only supports on the following switches,
3. 48-Port 100 4 1000BaseT with 2 shared Gigabit SFP Layer 2+ Management
Switch
4. 24-Port 1000BaseT with 2 shared Gigabit SFP Layer 2+ Management Switch
5. 48-Port 1000BaseT with 4 shared Gigabit SFP Layer 2+ Management Switch
1) dos land
This command enables and disables land-type attacks prevention.
Format
dos land {enable|disable}
Mode
Global Config
2) dos blat
This command enables and disables blat-type attack prevention.
Format
dos blat {enable|disable}
Mode
Global Config
3) dos syn-fin
This command enables and disables SYN-fin-type attack prevention.
Format
dos syn-fin {enable|disable}
Mode
Global Config
4) dos ports
4.1) dos ports smurf
This command enables and disables Smurf-TYPR attack prevention.
Format
dos ports smurf {enable|disable}
Mode
Global Config
4.2)dos ports ping-flooding
This command enables and disables ping-flooding-type attack
prevention.
Format
dos ports ping-flooding {enable|disable}
Mode
Global Config
4.3)dos ports synack-flooding
This command enables and disables SYNACK -flooding -type attack
prevention. Set rate is 64 kbps or 128kbps for port lists (1, 3-5, 7-9.11)
Format
dos ports synack -flooding {enable|disable} rate {64|128} <port-
list>
Mode
Global Config
e.g. Switch<Config>#dos ports synack -flooding enablerate 64 1-4
Switch<Config>#dos ports synack -flooding enablerate 64 5
tacplus
1) tacplus authen_type
This command is used to set authentication type. There are three types for
selecting: local, tacplus, localandtacplus.
Format
tacplus authen_type {local | tacplus | localandtacplus}
Mode
Global Config
2) tacplus add
This command is used to add a new server and set server IP
address, priority, key string, authentication port and timeout for reply.
Format
tacplus add server <IP_addr> priority <0-65535> key <key string>
port <auth port id> timeout <1-30>
Mode
Global Config
3) tacplus del
This command is used to delete a server.
Format
tacplus del server <IP_addr>
Layer 2/2+ Management Switch Series
40