Digitus DN-7039-B Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 76

background image

DN-7039-B

108M Wireless Router User Guide

¾

SSID -

Enter a value of up to 32 characters. The same name (SSID) must be

assigned to all wireless devices in your network. The default SSID is DIGITUS, but
it is recommended strongly that you change your networks name (SSID) to a
different value. This value is case-sensitive. For example,

DIGITUS

is NOT the

same as

DIGITUS

.

¾

Region

-

Select your region from the pull-down list. This field specifies the region

where the wireless function of the router can be used. It may be illegal to use the
wireless function of the router in a region other than one of those specified in this
field. If your country or region is not listed, please contact your local government
agency for assistance
The default region is United States. When you select your local region from the
pull-down list, Click the

Save

button

,

then the Note Dialog appears. Click OK.

Note Dialog

Note

: Some regions may not use

108Mbps Mode

since the operation for the

wireless interface in 108Mbps Mode is illegal. Limited by local law regulations,
version for North America does not have region selection option.

¾

Channel -

This field determines which operating frequency will be used. It is not

necessary to change the wireless channel unless you notice interference problems
with another nearby access point.

¾

Mode -

Select the desired wireless mode. The options are:

•

108Mbps (Dynamic) -

Super G

™

, 802.11g and 802.11b wireless stations can

connect to the router.

•

108Mbps (Static) -

Only Super G

™

wireless stations can connect to the router.

•

54Mbps (802.11g) -

Both 802.11g and 802.11b wireless stations can connect

to the router.

•

11Mbps (802.11b) -

Only 802.11b wireless stations can connect to the router.

Note

: The default is "54Mbps (802.11g)", which allows both 802.11g and 802.11b

wireless stations to connect to the router.

¾

Enable Wireless Router Radio -

The wireless radio of this Router can be enabled

or disabled to allow wireless stations access. If enabled, wireless stations will be
able to access the router, otherwise, wireless stations will not be able to access.

¾

Enable SSID Broadcast -

If you select the

Enable SSID Broadcast

checkbox, the

Wireless Router SSID will broadcast its name (SSID) on the air.

¾

Enable Wireless Security

– The wireless security function can be enabled or

disabled. If disabled, the wireless stations will be able to connect the router without
encryption. It is recommended strongly that you choose this option to encrypt your
wireless network. The encryption settings described below.

-

29

-

«
...
32
33
34
35
36
...
»

Содержание DN-7039-B













































































Отзывы:

Нет отзывов

Похожие инструкции для DN-7039-B

Бренд: Linksys Страницы: 2

Бренд: Zonet Страницы: 8

Бренд: Profile Страницы: 6

Magic WiFi mini Ek

Бренд: Devolo Страницы: 22

Бренд: Airlink101 Страницы: 46

Бренд: Comet Labs Страницы: 11

Бренд: ALIBI Страницы: 232

Бренд: Edge-Core Страницы: 64

Бренд: MiLAN Страницы: 155

Бренд: Premio Страницы: 2

Бренд: Allied Telesis Страницы: 44

Бренд: LevelOne Страницы: 61

Internet Security Appliances

Бренд: SonicWALL Страницы: 293

Бренд: TRENDnet Страницы: 2

Бренд: Trane Страницы: 8

Бренд: Datacom Страницы: 118

Network Controller

Бренд: MikroTik Страницы: 6

Бренд: Tripp Lite Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды