DN-7039-B
108M Wireless Router User Guide
¾
Supports UPnP, Dynamic DNS, Static Routing, VPN Pass-through.
¾
Detachable reverse SMA connector Antenna.
¾
Connecting Internet on demand and disconnecting from the Internet when idle for
PPPoE.
¾
Built-in NAT and DHCP server supporting static IP address distributing.
¾
Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC
address filtering.
¾
Supports connecting/disconnecting from the Internet on a specified time of day.
¾
Supports access control, parents and network administrators can establish
restricted access policies based on time of day for children or staff.
¾
Provides 64/128/152-bit WEP encryption security and wireless LAN ACL (Access
Control List).
¾
Supports Flow Statistics.
¾
Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter.
¾
Ignores Ping packets from WAN or LAN ports.
¾
Supports firmware upgrade.
2.3 Panel Layout
2.3.1 The Front Panel
The front panel of the DN-7039-B consists of several LED indicators, which is designed
to indicate connections. View from left. Table 2-1 describes the LEDs on the front panel
of the router.
Figure 2-1 Front Panel sketch
Name Action
Description
Not lit
No Power
PWR
Lit up
Power on
Lit up
The router is initializing
Flashing
The router is working properly
SYS
Not lit
The router has a hardware error
Not lit
There is no wireless device linked to the device
WLAN
Flashing
The Wireless function is enabled
Not lit
There is no device linked to the corresponding port
There is a device linked to the corresponding port but no
activity
Lit up
WAN,1-4
Flashing
There is an active device linked to the corresponding port
Table 2-1 The LEDs description
2.3.2 The Rear Panel
The rear panel contains the following features. (View from left to right)
-
4
-
