2 RAID Function
What is RAID?
RAID (Redundant Array of Independent Disks) is a set of
technology standards for teaming disk drives to improve fault
tolerance and performance
Why RAID?
Increased data protection. If in an unfortunate event where a
drive fails, the same data is preserved on the mirrored drive.
Intelligent array controllers can apply different types of RAID
for different hard disk drives. Increased overall network system
data capacity. Increased I/O read/write efficiency.
Setting the RAID Mode:
The RAID mode should be set before installing the drives and
then first formatting the drives.
1.
Open the rear cover and
pull out the plastic frame from the
aluminum-shell
.
2.
Set the RAID switch and select your preferred RAID mode.
There have 2 mode switch in the inner of the product, it can
form 4 kinds of different ways through these 2 switches, it
can realize 4 kinds of different functions as below:
