3.3 Connect to computer
1.
Connect one end (type Mini) of the USB cable into
the mini USB Port of your HDD enclosure.
2.
Connect the other end of the USB cable (type A) into
any active USB port of the computer.
3.
Connect Power supply to the enclosure and power up
the enclosure
4.
Let OS search and install the driver automatically.
5.
Use the disk management tool (PC) or disk utility (MAC)
to create a new partition and format the drives
6.
Open “My Computer” to see your external hard drive
ready to use.
NOTE:
To enjoy USB 3.0 super speed up to 5Gbps,your computer must
be equipped with built-in USB 3.0 ports, or a USB 3.0 host PCI-e
card
Should use DC power cable to connect the computer for
providing extra power.
It is not possible to add more drivers to an existing RAID array
without re-formatting it. When adding additional drivers at a
later point, they will only be detected after the device has been
restarted and the drivers have been re-formatted.
