hours,depending on the drive capacity.If RAID rebuilding
is OK, the HDD LED will keep light normally.If the
capacity of the new drive is less than the previous
drive,the HDD LED will display as above state.The rebuild
process can not be completed.
2.
For RAID 0 and JBOD,restart the system and then format
the drives again.
3.
For Non-RAID (Normal Mode),simply format the new
drive.
Note: We recommend not turning off the power during the rebuild
process but if the process is interrupted,it will continue rebuilding the
data as soon as the power is turned back on.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is
part of the shipping content. If the Declaration of Conformity is missing, you can
request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
