Digitus Biometrics dbNEXII, Руководство пользователя

Страница: 10 / 27

Digitus Biometrics, Inc.
User Manual - Models: dbNEXII, dbNEXIII, dbSAI, dbTRI
Page 10 of 27
Entering the Menu after Initial Setup
Other than at initial setup, the menus can be accessed by any enrolled manager in
the following way:
›
Press and release the # key .
›
Present the first enabled credential, PIN, RFID Card/Token or Fingerprint.
›
Present each additional credential as requested.
The db Nexus and db Tracker units have a comprehensive series of on-board menus.
The entire range of menu options that are available on the db Sentry unit are also
available on the db Nexus and db Tracker units.
It is recommended that most configuration and user enrollment for the db Nexus is
done via the DAS Management Software and not using the menus. The one
exception to this is setting the IP address of the db Nexus unit. To set the IP address
of the db Nexus unit, follow the steps in Setting the IP Address Via the Menus .
Menu Overview
Diagrams of the menus can be found in Appendix 1.
The menus are very intuitive and easy to follow. If a menu item is asking for
a value to be entered, it will show you the range of acceptable values.
If a decision need to be made in the menus, 1=Yes and 0=No is the rule to
follow. Again, this will be displayed on the unit's LCD.
If you see an item that is enclosed in [] (square parentheses), this indicates
the currently selected setting. To retain the current setting, you can press the
# key. For example if the YES option is selected the display would show the
square brackets as such [YES=1].
If you ever need to go back to a previous menu item or back-space or exit a
menu, the * key can be used.
Menu Layout
The menus are broken down into 4 top level menu categories:
›
User Menu - Add, Edit and Delete Users.
›
Operations Menu - Unit settings. Turn any feature on or off via this menu.
›
Time Menu - Set the unit's date and time. Create Time Codes.
›
Network Menu - Set the unit's network settings