Digitrax Zephyr xtra Скачать руководство пользователя страница 60

Страница: 60 / 66

www.digitrax.com

Specifications

Size:

7” length x 5” width x 3” high

18 cm x 12.5 cm x 7.4 cm

Weight:

12.5 ounces

354 grams

Caution:

This electrical product is not a toy. Not recommended for unsu-

pervised use by children under 14 years of age.

For protection against fire, electrical shock and other hazards,

this unit must be operated from a 12V DC battery or isolated DC

SAFETY EXTRA LOW VOLTAGE SUPPLY (SELV) with appro-

priate overload protection.

electrical

rating:

Maximuminput:

3 Amps, 16.8 Volts DC, 42 VA continuous.

DO NOT exceed 16.5V DC input.

Digitrax recommends the use of a 12V DC battery or a dedicat-

ed PS314 power supply or equivalent for use with the DCS51.

PS314 output is rated at 13.8V DC and allows up to 3Amps to

enable correct operation of the unit.

A 2mm power connector is needed to connect a 12V DC battery

or SELV UL Class 2 rated DC power supply that meets the stat-

ed requirements.

Output(totrack):

DCC digital waveform of approximately 0.5V

less than input DC voltage, which meets recommendations for

most HO and N scale locomotives with DCC decoders installed.

patents&

intellectual

property:

As of the date of this writing Digitrax, Inc. owns the rights to the

following patents which may cover some or all of the products

covered in this brochure: US 6,275,739, 6,536,716, 6,533,223,

6,367,742 B1, 6,533,224. Additional patent applications are

pending. LocoNet is maintained as trade secret information.

trademarks

: As of the date of this writing Digitrax, Inc. owns the following

trademarks which may cover some or all of the products cov-

ered in this manual: Digitrax, The Digitrax Train Logos, LocoNet,

Super Empire Builder, Super Chief, Transponding, Zephyr Xtra

Jump and others. Additional trademark registrations are pend-

ing. Digitrax trademarks may not be used in any form without

prior written consent of Digitrax, Inc.

Copyrights:

of these pages are not to be reproduced or reprinted in any form

without the express written consent of Digitrax, Inc.

Digitrax, Inc. is not responsible for unintentional

errors or omissions in this document.

Содержание Zephyr xtra



































































Результаты поиска

Содержание Zephyr xtra

Отзывы:

Похожие инструкции для Zephyr xtra

Бренды по названию

Популярные бренды

Digitrax Zephyr xtra, Руководство пользователя

Результаты поиска

Содержание Zephyr xtra

Отзывы:

Похожие инструкции для Zephyr xtra

Бренды по названию

Популярные бренды