DigiTech Valve FX, Руководство пользователя

Страница: 57 / 82

56
• Finally, use the <UP/DOWN> Cursor keys or the Data wheel to
select Program 150. The display should now read:
• Press <UTILITY> to exit to your last position in the Program.
Now, when you’re in Bank 4, pressing Patch footswitch #7 on the
Control One foot controller will recall Program #150 on the Valve FX.
PROGRAM / BANK - UP / DOWN Instead of choosing a Program as a Patch in a Bank (as described in
Patch Assignment above), it is possible to assign various performance
functions to the footswitches. When assigning the function of the
Patch, scroll past Program 256 and these other options will appear.
Program Up , Program Down , Bank Up , and Bank Down per-
form exactly as the name implies in that they increment and decre-
ment through Programs or Banks.
NOTE: When using Program Up / Program Down or Bank
Up / Bank Down , it is important to remember that they function
only within their assigned Bank. When you leave the Bank in
which they are assigned, they will take on their assigned function
for the newly selected Bank. These functions can be assigned to
as many Banks in the Valve FX as you want, but remember that
you must set up each Bank individually.
TOGGLE CC It is also possible to set up a Patch so that the footswitch acts as a
Continuous Controller toggle. Following the same procedure as Patch
Assignment, a
Toggle CC ## can be selected in place of a
Program number. You will find, for example, that Patch 6 in every
Bank is assigned as
Toggle CC 21 at the factory. Each time
footswitch 6 is pressed, it will toggle between values 0 and 127 of CC
21. By following the factory default Patch / CC map on page 51, this
causes the Compression to be turned On and Off in nearly all the
Factory Programs.
INT PED = CC The built in Continuous Controller Pedal (defaulted to CC 4) can be
reassigned to manipulate a different Continuous Controller by setting
a patch up with a
Int Ped = CC ## . Use the same procedure as
Patch Assignment and choosing Int Ped = CC ## instead of a
Program number.
Upon hitting the assigned footswitch, the Internal CC pedal will be re-
assigned from its current controller to the new continuous controller.
Hitting the footswitch again will assign the pedal back to the default
CC number. Changing the Program will also always cause the pedal
to be assigned to the default CC number.
¡Bank 4 ™Patch 7
™(PROG.NAME) 15
0
Section 5 - The Utility Menu
Valve FX Owner’s Manual