33
Using an FS3X Footswitch
Using an FS3X Footswitch
An optional DigiTech FS3X
Footswitch can be connected to the
FS3X IN jack for additional hands-
free control of the SDRUM.
A TRS (tip-ring-sleeve) 1/4” cable
must be used when connecting the
FS3X.
When using a FS3X for control,
there are three modes of operation
to select from: Live, Table Top,
and Direct Part. These modes are
accessed by holding one of the
FS3X footswitches when making
the connection to the SDRUM. The
table below describes how to enter
each FS3X mode and the functions
controlled by each.
FS3X
Mode
Hold While
Connecting
FS3X Control
Footswitch 1
Footswitch 2
Footswitch 3
Live
(Default)
FS3X
Footswitch 1
Select Hats/Rides
Variation: Press to select
the next HATS/RIDES
variation (hold for previous).
Select Hats/Rides Sub-
Beat Timing: Press to
select the next HATS/RIDES
sub-beat timing (hold for
previous).
Play a Crash Cymbal: Press
to play a crash cymbal on
demand.
Table Top
FS3X
Footswitch 2
SDRUM Functions: Same
functionality as SDRUM
footswitch (press to play
and switch parts, press and
hold to stop and clear).
Add a Fill: During playback,
press for a fill.
Play a Crash Cymbal: Press
to play a crash cymbal on
demand.
Temporary Mute: Press
and hold to temporarily
mute the drums. Once the
FOOTSWITCH is released,
a fill will be played and the
drums will play normally at
the start of the next bar.
Tap Tempo and
Metronome On/Off: With
playback stopped, tap
repeatedly to tap in the
tempo (if the selected part
is empty, the metronome
will turn on). Press and hold
to turn the metronome on/
off (selected part must be
empty).
TRS Cable
Footswitch
1
Footswitch
2
Footswitch
3
Содержание SDRUM
Страница 1: ...OWNER S MANUAL...