DigiTech SDRUM, Руководство пользователя

Страница: 24 / 41

21
Selecting Drum Pattern Settings
Adjusting the Tempo
The tempo of a song can be adjusted either before or after teaching the SDRUM, and it can be adjusted using the
TEMPO button (tap tempo) or TEMPO knob.
After a part has been learned, or if the metronome feature is enabled, the TEMPO button will flash at the current
tempo of the song. The TEMPO button will flash red on the first beat of each bar (only during playback) and
green for the remaining quarter note beats if the tempo of the song has not been edited. If the tempo has been
edited from the song's stored value, the TEMPO button LED will flash amber instead of green. If the tempo is
changed by some mechanism other than the TEMPO knob (e.g., using tap tempo or loading a new song), then
the TEMPO knob will not function until it is turned past the center detent (stored) position.
When a part is being played, during the last bar of the part, the TEMPO button will flash brighter to indicate that
the drum pattern loop is coming around to the beginning.
Adjusting Tempo Using the Tempo Button
To adjust a song's tempo with the TEMPO button:
1. Play the song.
2. Tap in the desired tempo on the TEMPO button.
3. The TEMPO button will now flash amber, indicating that the new tempo differs from that stored with the
song.
TIP: To restore the original tempo, rotate the TEMPO knob a quarter turn above or below the center
detent position and then return it to the detent position.
4. Press and hold the TEMPO button for ~2 seconds to store the new tempo setting to the song. The TEMPO
LED will again flash green to indicate this is the song's stored tempo (center detent position on the TEMPO
knob).
Adjusting Tempo Using the Tempo Knob
The TEMPO knob's center detent position represents a tempo multiplier of 1X, which is the original tempo of the
learned song part. The full clockwise position provides a tempo of 2X the learned tempo and the full counter-
clockwise position provides a multiplier of 1/2X the learned tempo.
To adjust a song's tempo with the TEMPO knob:
1. Play the song.
2. Turn the TEMPO knob to change the tempo. Note that the TEMPO knob may have to be turned past the
center detent position before changes will be made. The TEMPO button will now flash amber, indicating
that the new tempo differs from that stored with the song.
TIP: To restore the original tempo, rotate the TEMPO knob back to the center detent position..
3. Press and hold the TEMPO button for ~2 seconds to store the new tempo setting to the song. The TEMPO
LED will again flash green to indicate this is the song's stored tempo (center detent position on the TEMPO
knob).