DD-5100
4) enable access using TM tag:
[3.SEttinGS] >
> [3.Acc.tYPE] >
> [1.t.tAG] >
> [2. En] >
> [donE]
5) disable access using RFID tag:
[3.SEttinGS] >
> [3.Acc.tYPE] >
> [1.r.tAG] >
> [1.diS] >
> [donE]
6) enable access using RFID tag:
[3.SEttinGS] >
> [3.Acc.tYPE] >
> [1.r.tAG ] >
> [2. En] >
> [donE]
Door unlock timer in error case
If any error occurs e.g. tag reader or keyboard fail, error indicator will be shown on the screen see chapter 6
for more info. Since there is danger that users can't enter to building, special door unlock timer was implemented.
After programmed period timer will open doors if it's impossible to do so by user code or tag, in error case. Error
timer submenu structure is shown in fig. 20.
To set error timer up, please do following (timer units – seconds):
[3.SEttinGS]
>
>
[4.Err.UnL.]
>
>
[1.SEt]
>
>
[t- ]
> (enter timer interval in
seconds=2) >
>
[donE]
To turn the error timer off do the following:
[3.SEttinGS]
>
>
[4.Err.UnL.]
>
>
[2.oFF]
>
>
[donE]
Call signal number
at the Calling to the apartment time, to h
andset
is senting the beeper. The default is sent the 5 calls. After
completion, the subscriber can still answer the call. Call the number of rings can be changed from 1 to 15. The
example shows how to set the maximum number of calls
[3.SEttinGS]
>
>
[5.CS.no]
>
>
[no.- ]
> (input value no.=15) >
>
[donE]
Unlock Signal in handset ON / OFF
Opening the door using the key or the code intercom intercom handset to a call informing about the fact that
someone is coming to the apartment. This item allows you to enable or disable this feature. Unlocking the handset
off the signal structure is shown in Figure 21.:
Fig. 21:
Unlock Signal in handset ON / OFF
Unlock Signal in handset ON
[3.SEttinGS]
>
>
[6.UnL.bEEP]
>
>
[1.on]
>
>
[donE]
Unlock Signal in handset OFF
[3.SEttinGS] >
>
[6.UnL.bEEP]
>
> [2.oFF] >
> [donE]
CPW (Chipselect) function
This feature turns off the camera power on BUS send / receive a signal used for delivery of a network
connection intercom This item allows you to enable or disable this feature. Unlocking the handset off the signal
structure is shown in Figure 22 .:
26
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
Fig. 20: Structure of error timer configuration submenu
[1.SEt]
– set unlock timer counter
[2.oFF]
– disable door unlock timer
[3.SEttinGS]
[4.Err.UnL.]
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
ENTER
[1.On]
– Unlock Signal in handset ON
[2.oFF]
– Unlock Signal in handset OFF
[3.SEttinGS]
[6.UnL.bEEP]
