DD-5100
delete Tags).
4.3.1. Actions with identificators
Choose this item and perform all actions, related to identificators (TM and RFID), easily, to record or delete it.
See
the structural scheme of actions with identificators ( fig. 13).
Add a new identificators
There are two ways of adding a new key to door phone memory: 1) to record an indentificator without
relation to any user; 2) to add a key, related to a user upon ID number (flat number).
Generally when entering an identificator to memory, choose from menu
[1.tAG]
>
[1.Add]
and enter ID
number, related to the key. One ID number could be related to 1376 keys ( capacity of memory). In case you don’t
want to relate an identificator with a subscriber, simply do not enter any ID (or enter ID=0). See an example of
adding new identificators, related to flat No.15 (ID=15):
[1.tAG]
>
>
[1.Add]
>
>
[Id- ]
> (enter ID=15) >
>
[n (x)]
> (add new Tags one by
one)
[n (x)]
shows saved identificator’s rank number in door phone memory. It will serve in case you need to
delete unnecessary or missed identificators from the memory.
Add Service identificators
Service identificator is an auxiliary measure, assisting to provide door phone maintenance. six keys of such
type could be entered to door phone memory. Service identificator could be used for door unlock equally to
traditional keys. However, this key activates programming mode without SPIN code.
For recording Service identificator to memory choose
[1.tAG]
>
[1.S.Add]
from menu and attach a new key
to reader.
[1.tAG]
>
>
[2.S.Add]
>
>
[S- (x)]
> (add new keys one by one)
[S- (x)]
shows recorded identificator’s rank number in door phone memory.”S” means, that this key is
Service identificator.
22
ENTER
ENTER
ENTER
ENTER
ENTER
Fig. 12:
Menu structural scheme of actions with identificators
[1.tAG]
- actions with identificators
[2.CodE]
- actions with codes
[3.SEttinGS]
- system settings
[4.voL]
– volume control
[7.nEt]
– network settings
[6.AddrESSinG]
– setting of addressing
[5.USEr]
- subscribers administration
Programming mode
[8.F.rESEt]
- reset to factory settings
Fig. 13:
Menu structural scheme of actions with identificators
[1.tAG]
- actions with identificators
[1.Add]
- add new identificator
[2.S.Add]
- add Service identificator
[4.AutoAdd]
- auto add user tags
[5.dEL]
– delete identificator
[3.C.Add]
- add Common identificator
